Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Caning position

  1. #1
    Join Date
    Aug 2007
    Location
    Account closed
    Posts
    7

    Smile Caning position

    What is the best position to receive a bare bum caning? Should one's legs be together or apart and how quickly- or slowly - should the strokes be administered? I would like to hear your opinions.


  2. #2
    Join Date
    Jul 2007
    Location
    Merseyside/Cheshire/NW UK
    Posts
    36

    Default Re: Caning position

    For me (as i aint that flexible) the best position is feet as apart as needed to facilitate straight legs. this both rounds and tightens the bottom cheeks for a good sting.
    Depending on the ammount to be given, the strokes need to be given at a fairly fast pace (or, if a slow caning is to be given, in batches of, say, 6)
    I just dont feel comfortable in the bent over, touching toes position for long periods. I feel the blood rush to my head, the mucus rush to get out of my nose etc.

    Smokey

  3. #3
    Join Date
    Jan 2008
    Location
    NW London travel only
    Posts
    5

    Default Re: Caning position

    At 5'4" I found the vaulting horse a bit awkward & wrong position, even stretched to reach the bottom rail - My experience with a forum member
    on Sunday evening just gone, was the best CP session with a cane for a
    considerable time, must have been 30+ warm up with OTK spanking after
    watching short video on DVD to get in the mood !

    Ideal comfort
    Leap frog position, feet apart - hands on knees, possibly more suitable for
    Masters in the same height range as me >5' 6" Alternate 'diaper position'
    for heavier boys - I am 14st and OTK does not appeal to me - would rather go for the cane from the outset.

    Send PM to discuss possible session - 'caned1983'

  4. #4
    Join Date
    Jan 2008
    Location
    south london, can't accommodate
    Posts
    9

    Default Re: Caning position

    Bent over low horse or chair, wrists secured low on far side, legs straight and wide apart to allow good view from behind (ankles secured -- optional), slow strokes of cane in batches of 6, strokes counted aloud ("One, thank you Sir"), both cheeks equally marked, no strokes lower than buttock fold or higher than top of rear cleavage.

  5. #5
    Join Date
    Mar 2008
    Location
    1
    Posts
    3

    Default Re: Caning position

    I prefer the way my dad did it - me bent over the edge of a low table, my arms and chest flat on the surface, legs apart and bum up in the air. Bent over the back of a chair with hands gripping the front legs would be OK for a while but, like Smokey below, I do not like my head to stay down for too long. The worst one I ever had was restrained over a bench, ankles and wrists secured with straps - and I discovered (too late) that the tight bend over the bench restricted my breathing.
    Last edited by Andi; 16-03-2008 at 02:35 AM. Reason: spelling

  6. #6
    Join Date
    Feb 2008
    Location
    London
    Posts
    12

    Default Re: Caning position

    I need to feel comfortable when I am caned i.e. that is I need to be in a comfortable bending position so that I can concentrate on the caning.
    My preference is bending over the back of a chair with my hands on the arms. Legs straight and my bottom sticking out and slightly up. My knickers around my thighs and my skirt over my lower back. A slight reverse "C" position in the lower back helps to stick your bottom out and up for the cane. Women who wear shoes with high heels have an advantage because when they bend over , the high heels automatically make their bottoms stick out and up for the caning.


  7. #7
    Join Date
    Oct 2007
    Location
    London, can't accomodate
    Posts
    73

    Default Re: Caning position

    I like to be bent over something solid like a desk, table, punishment horse or armchair, or be laying or kneeling on a bed with pillows under my hips. Also, stretched over the roll arm of a leather sofa was a good position for taking the strap and cane and difficult to jump about from although I could kick my feet and my bottom bucked at each stroke.

  8. #8
    Join Date
    Apr 2008
    Location
    Surrey unable to accomodate
    Posts
    5

    Default Re: Caning position

    Over the years I have found the important thing is to be in as comfortable position as possible so as to concentrate all my attention on the strokes and their effect. Depending the views of the top, either bending over a punishent bench or frame with one's torso rested flat and legs sloping back so that the skin is not stretched tight, or lying flat on a bed with pillows raising the hips well. l have found these good relaxing positions. The legs are best spread well to give stability as well as rounding and tightening the buttocks. With the bed position the pillows raise the buttocks to a really prominent position and and I have sometimes been told to spread my legs to the edge either side which can be quite erotic

  9. #9
    Join Date
    Dec 2007
    Location
    Manchester/Scarborough; Sometimes
    Posts
    9

    Default Re: Caning position

    It sounds ridiculous but comfort is very important. If you're being caned (my favourite) or paddled or strapped or tawsed, it's essential you are comfortable. For me that means wearing my socks and boots, arse bared be it totally naked or not but best of all wearing my leather or rubber chaps. The ideal is be over a bench with some padding on top to prevent hard edges digging in and distracting the mind! I'm quite happy to be restrained (I have on occasion been secured by my balls) and to have other things brought into play to heighten the experience such as ball weights, the humbler and various clips and clamps. The really important things particularly when restrained are: not to be overstretched: to be able to support yourself comfortably on your own feet: and for the thing (preferably a bench) you're bent over to the right height for both you and the guy administering the thrashing.

  10. #10
    Join Date
    May 2008
    Location
    Herts/Can't accomodate as no sound proofing
    Posts
    24

    Default Re: Caning position

    This seems like a very simple question, but there are so many answers depending on the circumstances.
    However like so many correspondents here comfort/security is essential for me.
    I recall being bent over sofa cushions stacked on the arm of the sofa, and it was hard not to wobble, even before the first stroke.
    My lack of stability was mistaken (quite wrongly of course!) for fear.
    So, being bent over something solid is vital.
    If a short sharp shock (say up to 12 strokes) is to be delivered then definately legs together. It's easier to clench and that, for me, makes the pain more intense, and of course the strokes should be delivered as quickly as the recipient can count them. So ensure the miscreant is numerate.
    If it is a longer session and the cane follows an otk, paddle, tawse or whatever then I would certainly suggest legs apart, which I think makes it easier to relax and soak up the pain.
    The ideal arrangement is to place a low backed armless dining chair with its back to a table edge, and have the spankee stand with legs either side of the seat, bending to flatten their upper body onto the table. The knees will be a little bent, presenting the bottom properly for the cane.
    Well that's what I think, anyway!
    With respect

    Useful

    Hidden Content

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.